Parts
|
Features
|
| Main structure |
- Made of M.S.channel section
- Hoppers are made of 304 SS cover sheet
|
| Conveyor |
- Imported PVC Conveyor Belt 2 mtr. Width x 2 / 2.5 mtr. Length
- Non Magnetic SS side/Spillage guard,
- Idler Rollers
- Return-run Idler Rollers.
- 2 mtr. x 2 mtr. SS Plenum Chamber with MS Heavy Section fabricated modules.
- damper to control desired air pressure.
|
| Main Drive |
- 3HP 415 (+)- 10% Volt, / 3 Ph, 50 Hz (+)- 5% AC TEFC 1440 rpm Motor with variable speed Drive which gives you desired fermenting time.
|
| Auto cooling system |
- Motor 5 HP/ 7.5 HP / 10 HP 415 (+)- 10% Volt, 3 Ph, 50 Hz with Blower giving 2” to 2½” WG Air Pressure.
- Motor is connected with automatic temperature control system which maintains standard humidity
- Air Spreading SS Box gives even Air Pressure
- Taper large size outlet box designed in such way after the fermentation, at the time of cleaning by water no drop of water and tea will be accumulated.
|
| Upturner |
- Independent Drive Assembly is given in the middle of CFM.
|
| Rotary Brush |
- fitted at Discharge point to clean the Gauge Belt during operation
|
| Electrical control panel |
- Direct Display with Digital Temperature gauges at 2 points
- We also provide Automatic Digital R.H. Control device.
- Electrical Control Panel having main switch, starter, fuse, overload relay, digital temperature display, volt meters, ammeters and on-off switch.
- Suitable SS Duct connected with the Plenum Chamber of each modules.
- The main duct connection with the Blower through ‘Y’ Duct on middle of the CFM to maintain even air pressure all through.
- One mixed chamber with 2 Nos. Humidifiers having one air washer to allow only Humid air and arrest the water connected with the suction of the blower through square to round duct.
|
